{"product_id":"soler-performance-92mm-billet-throttle-body-c8-corvette-stingray-e-ray-soler-performance-eng-motorsport","title":"Soler Performance 92MM Billet Throttle Body - C8 Corvette Stingray \u0026 E-Ray","description":"\u003cp\u003eUpgrade the airflow and throttle response of your C8 Corvette Stingray LT2 with the Soler Performance 92MM Billet Throttle Body.\u003cbr\u003e\nFeaturing a true 92MM inlet-to-outlet through-bore design, this modified, ported, and calibrated throttle body is engineered as a direct bolt-on replacement with no adapter required. Soler rates wide-open-throttle airflow at approximately 1,200 SCFM, representing roughly a 20% increase over the 970 SCFM OEM throttle body.\u003cbr\u003e\nKey Features\u003c\/p\u003e\n\n\u003cp\u003eTrue 92MM inlet and 92MM outlet\u003c\/p\u003e\n\n\u003cp\u003eApproximately 1,200 ± 20 SCFM airflow at 20.4\" water vacuum\u003c\/p\u003e\n\n\n\u003cp\u003eApproximately 20% greater WOT airflow than OEM\u003c\/p\u003e\n\n\u003cp\u003eDirect bolt-on for the C8 Stingray LT2\u003cbr\u003e\nNo adapter required\u003cbr\u003e\nModified, ported, and calibrated design\u003cbr\u003e\nIntegrated upstream velocity stack\u003cbr\u003e\nOptimized porting taper and upstream bore\u003cbr\u003e\nIncreased blade\/interface discharge coefficient\u003c\/p\u003e\n\n\u003cp\u003eDiamond-polished 16 Ra microinch surface finish\u003c\/p\u003e\n\n\u003cp\u003eShaftless high-pressure side of throttle blade for increased WOT flow area\u003cbr\u003e\nSelf-cleaning throat\/flow gap\u003cbr\u003e\nDimpled shaft trailing edge\u003cbr\u003e\nDome and thread-locked screws\u003cbr\u003e\nNo tuning required\u003cbr\u003e\nDesigned to retain normal idle operation\u003cbr\u003e\n1-Year Warranty\u003c\/p\u003e\n\n\u003cp\u003eIncreased Airflow\u003cbr\u003e\nThe factory throttle body is rated at approximately 970 SCFM, while the Soler 92MM unit flows approximately 1,200 ± 20 SCFM at 20.4\" of water vacuum.\u003cbr\u003e\nThat's approximately a 20% increase in wide-open-throttle airflow, providing additional airflow capacity for the LT2 and making the throttle body especially useful as additional power-producing modifications are added.\u003cbr\u003e\nImproved Throttle Response\u003cbr\u003e\nThe benefits aren't limited to wide-open throttle.\u003cbr\u003e\nSoler designed the throttle body to deliver more airflow at every throttle position after idle, while maintaining normal idle functionality. The modified geometry is intended to provide a more immediate response off idle, smoother and more linear throttle behavior, and a more predictable response through the pedal range.\u003cbr\u003e\nThe result is a more responsive and spirited driving experience without requiring an ECU tune.\u003cbr\u003e\nTrue 92MM Through-Bore Design\u003cbr\u003e\nUnlike setups that rely on adapters or transitions, this throttle body uses a true 92MM inlet-to-outlet bore.\u003cbr\u003e\nThe porting taper, velocity stack, optimized blade interface, shaft design, and polished internal surfaces work together to improve airflow through the throttle body while minimizing unnecessary restrictions.\u003cbr\u003e\nDirect Bolt-On Installation\u003cbr\u003e\nDesigned specifically as an enhanced replacement for the factory electronic throttle body, installation is straightforward with no adapter required.\u003cbr\u003e\nWhat's Included\u003cbr\u003e\n(1) Soler Performance 92MM Throttle Body Valve Assembly\u003cbr\u003e\nWhy You Need This\u003cbr\u003e\nThe throttle body is one of the primary airflow passages feeding your 6.2L LT2, and increasing its airflow capacity gives the engine more room to breathe.\u003cbr\u003e\nFor a stock C8, the Soler 92MM throttle body is designed to deliver a sharper, more immediate throttle response and smoother pedal behavior. For modified cars, its approximately 20% increase in WOT airflow capacity provides additional headroom as intake, exhaust, and other performance upgrades increase the engine's airflow requirements.\u003cbr\u003e\nWith a true 92MM bore, direct bolt-on installation, no adapter, and no required tuning, it's a straightforward way to improve the LT2's throttle and airflow characteristics without turning the upgrade into a complicated modification.\u003cbr\u003e\nVehicle Fitment\u003cbr\u003e\n2020+ Chevrolet Corvette C8 Stingray\u003c\/p\u003e\n\n\n\u003cp\u003e6.2L LT2 V8\u003c\/p\u003e\n\n\u003cp\u003eStingray\u003cbr\u003e\nStingray Z51\u003cbr\u003e\nCoupe\u003cbr\u003e\nHardtop Convertible (HTC)\u003c\/p\u003e","brand":"Elite Mustang Parts","offers":[{"title":"Default Title","offer_id":53604812783797,"sku":"SE8223-92","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4349\/7141\/files\/92MM_BILLET_BGR.webp?v=1793010821","url":"https:\/\/elitemustangparts.com\/products\/soler-performance-92mm-billet-throttle-body-c8-corvette-stingray-e-ray-soler-performance-eng-motorsport","provider":"Elite Mustang Parts","version":"1.0","type":"link"}