{"product_id":"verus-engineering-v1x-swan-neck-rear-wing-c8-corvette-verus-engineering-eng-motorsport","title":"Verus Engineering V1X Swan Neck Rear Wing - C8 Corvette","description":"\u003cp\u003eVerus Engineering V1X Swan Neck Rear Wing - C8 Corvette\u003c\/p\u003e\n\n\u003cp\u003eThe Verus Engineering V1X Swan Neck Rear Wing is a serious aerodynamic upgrade developed for C8 Corvette owners looking for substantially increased rear downforce and improved high-speed stability. Using CFD analysis, wind-tunnel testing, and real-world validation, the V1X combines a large high-efficiency carbon fiber wing element with a swan-neck mounting system designed to maximize the low-pressure region underneath the airfoil. \u003cbr\u003e\nKey Features\u003c\/p\u003e\n\n\u003cp\u003e1850mm wide, 300mm chord V1X wing element\u003cbr\u003e\nHigh-downforce swan-neck mounting design\u003c\/p\u003e\n\n\u003cp\u003e2x2 twill pre-preg carbon fiber wing\u003cbr\u003e\nAutoclave-cured construction\u003cbr\u003e\nAutomotive high-gloss clear coat\u003cbr\u003e\n6061-T6 machined aluminum mounting components\u003cbr\u003e\nMounting components CNC machined in-house\u003cbr\u003e\nStainless steel hardware\u003cbr\u003e\n15 degrees of wing adjustment\u003cbr\u003e\nCFD developed and wind-tunnel tested\u003cbr\u003e\nDesigned using in-house vehicle scan data\u003cbr\u003e\nNear-OEM fit and finish\u003cbr\u003e\nDesigned to work with significant front aerodynamic packages\u003cbr\u003e\nMounts to the factory rear structure\/trunk configuration\u003cbr\u003e\nVented carbon fiber endplates included\u003cbr\u003e\nGurney flap included\u003cbr\u003e\nComplete installation hardware included\u003c\/p\u003e  \n\n\n\u003cp\u003eHigh-Downforce V1X Airfoil\u003cbr\u003e\nThe V1X is designed for significantly greater aerodynamic capacity than Verus' smaller UCW wing. According to Verus, the V1X at only 2 degrees angle of attack produces more downforce than the UCW at 12 degrees, while also producing less drag. \u003cbr\u003e\nThe larger V1X profile allows the wing to balance substantial front aerodynamic modifications, making it particularly well suited for track-focused C8 builds equipped with an aggressive front splitter and other functional aero components. \u003cbr\u003e\nSwan Neck Aerodynamic Design\u003cbr\u003e\nThe top-mounted swan-neck uprights leave more of the airfoil's lower surface unobstructed. This allows the wing to better utilize the clean, low-pressure region underneath the element, improving overall downforce generation while minimizing the drag penalty associated with producing additional rear grip. \u003cbr\u003e\nCFD \u0026amp; Wind-Tunnel Developed\u003cbr\u003e\nVerus developed the V1X using advanced aerodynamic analysis, including the ANSYS Adjoint Solver, Computational Fluid Dynamics, and wind-tunnel testing. CFD was also used to verify that the wing receives adequate airflow when installed on the C8 rather than evaluating the airfoil only in isolation. \u003cbr\u003e\nVerus states that its CFD predictions correlated closely with real-world experimental testing, helping validate the aerodynamic performance of the finished wing. \u003cbr\u003e\nAdjustable Track Performance\u003cbr\u003e\nThe V1X provides 15 degrees of adjustment, allowing the wing angle to be fine-tuned based on the vehicle's aerodynamic configuration and intended use. This gives track-focused owners the ability to adjust rear aero balance when pairing the wing with different front splitter and aero setups. \u003cbr\u003e\nPremium Carbon Fiber Construction\u003cbr\u003e\nThe rear wing element is manufactured from 2x2 twill pre-preg carbon fiber, autoclave cured, and finished in an automotive-grade high-gloss clear coat.\u003cbr\u003e\nThe mounting system utilizes 6061-T6 aluminum components machined in-house on 5-axis CNC equipment, along with stainless steel hardware for a high-strength, precision-fit installation. \u003cbr\u003e\nWhat's Included\u003cbr\u003e\nThe complete kit includes the rear wing assembly, two machined aluminum swan-neck uprights, two machined aluminum rear wing engine-cover mounts, two machined aluminum bottom supports, two vented carbon fiber endplates, a Gurney flap, and the necessary installation hardware. \u003cbr\u003e\nVehicle Fitment\u003cbr\u003e\n2020+ Chevrolet Corvette C8\u003cbr\u003e\nThe retailer lists compatibility across C8 Stingray, Z06, E-Ray, ZR1, ZR1X, Grand Sport, and Grand Sport X applications, with Coupe and HTC configurations shown. The product is described as designed for widebody applications while fitting other C8 models as well.\u003c\/p\u003e","brand":"Elite Mustang Parts","offers":[{"title":"Coupe","offer_id":53604818452661,"sku":"A0733A","price":6599.95,"currency_code":"USD","in_stock":true},{"title":"HTC","offer_id":53604818485429,"sku":"A0834A","price":6599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4349\/7141\/files\/A0733A_SwanNeckV1XRearWingKit-CorvetteStingray_C8.jpg?v=1793010876","url":"https:\/\/elitemustangparts.com\/products\/verus-engineering-v1x-swan-neck-rear-wing-c8-corvette-verus-engineering-eng-motorsport","provider":"Elite Mustang Parts","version":"1.0","type":"link"}